| | |
|
| |
| | |
|
|
Clarostat N.O.S. Full Size Potentiometers
We bought a lot consisting of thousands of New Old Stock Clarostat sealed nickel case pots! Almost all are are two watt rating. Most are good old he-man molded carbon except for the pricier and supposedly longer lasting conductive plastic "380" series designated pots. All clean stock in original factory individual cartons! Most of the pots are marked "S"; this is a linear taper. These pots appear to have been manufactured by Clarostat in the USA; many are stamped "MADE IN USA". All of these pots have a 1&1/16" diameter nickel plated sealed case, three solder lug terminals, 3/8" long threaded bushing for standard size fastening nut. All feature superb build quality. Most of the pots have a standard 1/4" diameter solid shaft for Fender style set screw knobs. Some pots have a very short nut locking screwdriver adjust shaft similar to those found on hum balance and bias pots and clearly described as such. Mounting hardware is included. The Clarostats are fine quality pots for high end guitar amps, guitar effects pedals, hi-fi and studio gear, test equipment, etc. Quantities of almost all values are limited so buy early for best selection.
S Taper seems to be a regular Linear Taper.
Z Taper seems to be a regular logarithmic/Audio Taper.
Clarostat Pot, 500 Ohms, 2W, "380C-1 S Taper"
1&7/16" long, 1/4" diameter solid shaft
New Old Stock in Factory Carton. Conductive Plastic.
New Old Stock Clarostat sealed nickel case pot. 1&1/16" diameter nickel plated sealed case.
|
Clarostat Pot, 150 Ohms, 2W, "380C-3 S Taper"
7/16" long, 1/4" Solid Shaft
New Old Stock in Factory Carton. Conductive Plastic.
New Old Stock Clarostat sealed nickel case pot. 1&1/16" diameter nickel plated sealed case, 3 solder lug terminals.
|
Clarostat Pot, 250 Ohms, 2W, "43C1"
1&7/16" long, 1/4" diameter solid shaft
New Old Stock Clarostat sealed nickel case pot. Good old he-man molded carbon in original factory carton. 1&1/16" diameter nickel plated sealed case.
|
Clarostat Pot, 300 Ohms, 2W, "43C1"
1&7/16" long, 1/4" diameter solid shaft
New Old Stock Clarostat sealed nickel case pot. Good old he-man molded carbon in original factory carton. 1&1/16" diameter nickel plated sealed case.
|
Clarostat Pot, 400 Ohms, 2W, "43C1"
1&7/16" long, 1/4" diameter solid shaft
New Old Stock Clarostat sealed nickel case pot. Good old he-man molded carbon in original factory carton. 1&1/16" diameter nickel plated sealed case.
|
Clarostat Pot, 7500 Ohms, 2W, "43C1"
1&7/16" long, 1/4" diameter solid shaft
New Old Stock Clarostat sealed nickel case pot. Good old he-man molded carbon in original factory carton. 1&1/16" diameter nickel plated sealed case.
|
Clarostat Pot, 7500 Ohms, 2W, "43C2"
Very short locking screwdriver adjust shaft, comes with nickel plated locking nut.
New Old Stock Clarostat sealed nickel case pot. Good old he-man molded carbon in original factory carton.
|
Clarostat Pot, 250 Ohms, 2W, "43C2"
Very short locking screwdriver adjust shaft, comes with nickel plated locking nut.
New Old Stock Clarostat sealed nickel case pot. Good old he-man molded carbon in original factory carton.
|
Clarostat Pot, 400 Ohms, 2W, "43C2"
Very short locking screwdriver adjust shaft, comes with nickel plated locking nut.
New Old Stock Clarostat sealed nickel case pot. Good old he-man molded carbon in original factory carton.
|
Clarostat Pot, 150 Ohms, 2W, "53C1 S Taper"
1&7/16" long, 1/4" diameter solid shaft
New Old Stock Clarostat sealed nickel case pot. Good old he-man molded carbon in original factory carton. 1&1/16" diameter nickel plated sealed case.
|
Clarostat Pot, 350 ohms, 2 Watt, 53C1
1&7/16" long 1/4" diameter solid shaft
New Old Stock Clarostat sealed nickel case pot. Good old he-man molded carbon in original factory carton. 1&1/16" diameter nickel plated sealed case.
|
Clarostat Pot, 750 Ohms, 2W, "53C1 S Taper"
1&7/16" long 1/4" diameter solid shaft
New Old Stock Clarostat sealed nickel case pot. Good old he-man molded carbon in original factory carton. 1&1/16" diameter nickel plated sealed case.
|
Clarostat Pot, 2.5 Meg Ohms, 2W, "53C2 S Taper" RV4 LAYSA 255B
Very short locking screwdriver adjust shaft, comes with nickel plated locking nut.
New Old Stock Clarostat sealed nickel case pot. Good old he-man molded carbon in original factory carton
|
Clarostat Pot, 7.5 Meg Ohms, 2W, "53C2 S Taper"
S Taper, very short locking screwdriver adjust shaft, comes with nickel plated locking nut.
New Old Stock Clarostat sealed nickel case pot. Good old he-man molded carbon in original factory carton.
|
Clarostat Pot, 7500 Ohms, 2W, "53C2 S Taper"
Very short locking screwdriver adjust shaft, comes with nickel plated locking nut.
New Old Stock Clarostat sealed nickel case pot. Good old he-man molded carbon in original factory carton.
|
Clarostat Pot, 10M, 2W, "53C2 S Taper"
10 Meg, 2W, "53C2 S Taper", very short locking screwdriver adjust shaft, comes with nickel plated locking nut.
New Old Stock Clarostat sealed nickel case pot. Good old he-man molded carbon in original factory box
|
Clarostat Pot, 150 Ohms, 2W, "53C2 S Taper"
53C2 RV4 LAYSA 151A S Taper, very short locking screwdriver adjust shaft, comes with nickel plated locking nut.
New Old Stock Clarostat sealed nickel case pot. Good old he-man molded carbon in original box
|
Clarostat Pot, 150K Ohms, 2W, "53C2 S Taper" RV4 LAYSA 154A
Very short locking screwdriver adjust shaft, comes with nickel plated locking nut.
New Old Stock Clarostat sealed nickel case pot. Good old he-man molded carbon in original factory carton.
|
Clarostat Pot, 250 Ohms, 2W, "53C2"
53C2 RV4 LAYSA 251A S Taper, very short locking screwdriver adjust shaft, comes with nickel plated locking nut.
New Old Stock Clarostat sealed nickel case pot. Good old he-man molded carbon in original factory carton
|
Clarostat Pot, 350 Ohms, 2W, "53C2 S Taper"
Very short locking screwdriver adjust shaft, comes with nickel plated locking nut.
New Old Stock Clarostat sealed nickel case pot. Good old he-man molded carbon in original factory carton.
|
Clarostat Pot, 4M Ohms, 2W, "53C2 S Taper"
Very short locking screwdriver adjust shaft, comes with nickel plated locking nut.
New Old Stock Clarostat sealed nickel case pot. Good old he-man molded carbon in original factory carton.
|
Clarostat Pot, 5 Meg Ohms, 2W, "53C2 S Taper" RV4 LAYSA 505B
Very short locking screwdriver adjust shaft, comes with nickel plated locking nut.
New Old Stock Clarostat sealed nickel case pot. Good old he-man molded carbon in original factory carton.
|
Clarostat Pot, 750 Ohms, 2W, "53C2 S Taper"
53C2 RV4 LAYSA 751A S Taper, very short locking screwdriver adjust shaft, comes with nickel plated locking nut.
New Old Stock Clarostat sealed nickel case pot. Good old he-man molded carbon in original box.
|
Clarostat Pot, 7500 Ohms, 2W, "53C2 RV4 LAYSA 752A S Taper"
Very short locking screwdriver adjust shaft, comes with nickel plated locking nut.
New Old Stock Clarostat sealed nickel case pot. Good old he-man molded carbon in original factory carton.
|
Clarostat Pot, 750 Ohms, 2W, "53C3 RV4 NAYSD 751A S Taper"
7/16" long, 1/4" diameter solid shaft
New Old Stock Clarostat sealed nickel case pot. Good old he-man molded carbon in original factory carton. 1&1/16" diameter nickel plated sealed case.
|
Hex nuts for guitar and amplifier pots, jacks etc. Nickel plated steel. These hex nuts will fit most USA Fenders, Gibsons and many, many other USA guitars EXACTLY. No roadie repair kit is compete without a stash of these essential fasteners.
| |
|
|
|