| | |
|
| |
| | |
|
|
Angela/Jensen Aluminum Foil Paper In Oil Signal Capacitors
Back
by popular demand! Aluminum foil plates, oil impregnated paper
dielectric. One of the best sounding audio signal capacitors ever made;
smooth, natural and harmonically right. Superb performance in
guitar tone control circuits, tube guitar amplifiers, tube hi-fi gear
and tube studio equipment. Only the copper foil Jensens offer higher
fidelity. If you don't have the budget or space for Jensen copper foil
paper in oil capacitors the aluminum foil version is a fine choice.
Very compact size; these capacitors fit most guitar tone circuits
nicely. Tinned copper leads measure approx. 45mm. Leads are solder
sealed to eyelets in the end discs. Hermetically sealed aluminum tube
casing with outer plastic insulation jacket. The
capacitor element is insulated from the aluminum casing. Not polarized and non-directional.
Tone Cap Tips
In your guitar the Tone Cap rolls off the
highs. The higher the value the more highs are rolled off.
.01µf
.015µf Great alternative to .022 in P-90 and humbucker equipped guitars. Woman tone!
.022µf The traditional value for P-90 and humbucker equipped guitars.
.047µf The traditional choice for Fender and other similarly equipped guitars with single coil pickups.
0.1µf
This value was used originally in old Fender guitars and basses but
most modern players feel that it rolls off the highs too much, a relic
from the days when guitar players had to 'double on bass'.
.01/630VDC, 26 long x 14mm diameter Jensen/Angela Aluminum Foil Paper In Oil Signal Capacitor. This value is becoming increasingly popular with modern players seeking a capacitor with less treble roll off than a .022uF, especially in P90 and humbuckers.
|
.022/630VDC, 27 long x 14.32mm diameter Jensen/Angela Aluminum Foil Paper In Oil Signal Capacitor..022 is the traditional value used by Gibson since the '50s in humbucking and P90 pickup equipped guitars. Some folks also like this value in 'Super Strats'.
|
.047/630VDC, 33mm long x 14mm diameter Jensen/Angela Aluminum Foil Paper In Oil Signal Capacitor. Traditional choice for Fender and other similarly equipped guitars with single coil pickups.
|
.1/630VDC, 35mm long x 16mm diameter Jensen/Angela Aluminum Foil Paper In Oil Signal Capacitor. This value was used originally in old Fender guitars and basses but most modern players feel that it rolls off the highs too much.
|
Please note that in order to receive a matched pair of capacitors you need to order two of the same value and type of capacitors to match. Your order must include two capacitors AND Pair Matching.
|
Please note that in order to receive a matched quad of capacitors you need to order four of the same value and type of capacitors to match. Your order must include four capacitors AND Quad Matching. Quad matching is a service that we perform on capacitors
|
|
|
|